| Prop shaft Horsepower | :150 HP |
| Full Throttle Operating Range | :5000 ~ 6000 rpm |
| Gear Ratio / Shift | :2.00:1 / F-N-R |
| Fuel Induction | :EFI |
| Alternator | :35 – 50 Amp |
Used Yamaha In-Line 4 150HP Shaft Engine.
| Engine Type | :Inline 4 |
| Bore x Stroke | :3.78 x 3.79 in. (96 x 96.2 mm) |
| Displacement | :2.8 L (DEC) |
| Starting | :Electric |
Dimensions.
| Shaft Length | :25 in. |
| Weight | :489 lb. (222 kg) |
Model Specific Features.
- Compatible with mechanical controls or digital Command Link Plus® or Helm Master® controls
- Only 478 pounds (20” shaft model)
- Available in 20” or 25” shafts
- Powerful 50-amp alternator (2.8-liter digital) or 35-amp alternator (2.7-liter mechanical)
Used Yamaha In-Line 4 150HP Specifications.
- Engine Type: Inline 4
- Displacement: 2.8L (DEC)
- Bore x Stroke: 96 x 96.2mm (3.78 x 3.79in)
- Prop Shaft Horsepower: 150hp @ 5500 rpm
- Full Throttle RPM Range: 5000 ~ 6000 rpm
- Alternator Output at W.O.T.: 35 – 50 Amp
- Compression Ratio: 9.0:1 & 10.3:1
- Fuel Induction System: EFI
- Weight*: 221kg (487 lbs)
- Fuel: Octane 87 & Octane 89
- Engine Oil: Yamalube® 4M (See owner’s manual)
- Fuel Filtration: Yamaha 10 Micron Fuel/Water Separating Filter (external)
- C.A.R.B. Rating: 3-Star
- Exhaust: Through Propeller
- Intake: 16
- Ignition: TCI Microcomputer
- Spark Plug: NGK-LFR6A-11 & LFR5A-11
- Alternator Output: 35 – 50 Amp
- Starting System: Electric
- Lubrication: Wet Sump
- Engine Oil Capacity: 4.5L/4.3L
- Recommended Cooling: Thermostatic Control
- Ethanol Blend Limit: 10% Maximum
- Gear Ratio: 2.00:1
- Gear Shift: F-N-R
- Shaft Length: 25″
- Degree of Tilt: 70°
- Degree of Trim: -4° through +16°
- Dry Weight: 222kg (489 lbs)
- Mounting Centers: 26″
- Steering Angle (maximum): 32° from center, either direction
Reviews
There are no reviews yet.